A LED strobe light is an advanced piece of equipment that consumes very less power but offers a lot of functionality. The simplest type of strobe light is the one which comes laced with 1W LED in a variety of colors; the most common ones being amber, green, gray, red and blue. These lights offer two distinct features as compared to other types of emergency vehicle lighting. Their mounting flexibility is their main strength. These lights are also referred to sometimes as windshield lights, can be mounted very easily. The kit usually includes mounting brackets which provides the opportunity to mount at them an angle that is appropriate.The other feature offered by the LED strobe light that isn't matched by any other option is the dazzling flashing pattern. The speed of LED strobes is next only to lasers and one can get as many as 15 flashes in a second. So these can be used on cop vans, ambulances, fire engines, on highways where motorists have to be cautioned and also at party venues. They can be used almost anywhere if dazzling lights are needed to attract the attention of people around.The LED strobe light is quite portable too. This portability feature has been achieved to a great extent because of the customization that is possible. The number of LED bulbs can be varied. In fact, modules of LEDs can be assembled in arrays and number of LED modules can be altered depending on where the light is to be used. Each strobe light comes with its own control circuit too. This control circuit is where the flashing patterns can be changed. You can increase or decrease the number of flashes per second. You can also alter the sequence in which the LED bulbs of different colors start glowing. All this programmable flexibility is embedded in a controller chip that can make the light unit quite simple and free of complication.
Load equalizers suck....Huge waste of $$ if you go with LED's, then install load equalizers...Might as well leave the stock bulb in there...If you're gonna switch turns to LED's use an electronic flasher instead...
Load equalizers suck....Huge waste of $$ if you go with LED Modules, then install load equalizers...Might as well leave the stock bulb in there...If you're gonna switch turns to square led light use an electronic flasher led lights power supply ...