Contest $15 For Quick Circular Banner/Decal Design

I need a quick 60 inch circular banner decal design. I have attached a rough sketch of what I need, along with some of the images to incorporate. Please do the design in high quality printing format. You can modify these images and/or use other images that you think are better looking and size quality.

Important: Must use solid colors and the font mentioned. Also, must use the longhorn attached, it's the university of Texas longhorn logo.




Colors:
Baseball Stitching - Burnt orange
Longhorn - Burnt Orange Inside with a Black Outline around it (refer to attached image)
Number "44" - In burnt orange

Burnt orange hex# is #BF5700
Font name is Copperplate Gothic Bold

Important Notes
- The longhorn must me as wide as possible.
- The longhorn must have a black outline.
- Place the number wherever it looks better. It could be at the top or bottom, but must not affect the longhorn's width/height size.

 

I apologize for not clarifying, but you must use the solid colors mentioned and the longhorn from the image. You may use a bigger, better quality longhorn, but it must be the University of Texas longhorn logo. Thanks

 

okay, thanks. hopefully this one works for you!

 

These all look good, but they all need a small revision. Everything has to be inside the circular form of the baseball.

Here is our feedback for each design:
@collegerut The "44" has to be on solid burnt orange. The black outline has to be around to complete longhorn symbol and make the black outline even throughout the perimeter of the longhorn. Also, as previously mentioned, please keep everything inside the circular shape of the baseball, the longhorn has to be as wide as possible without touching the baseball exterior outline.

@remus94 Can you remove the black outline around the baseball, but keep it for the longhorn. Also, as previously mentioned, please keep everything inside the circular shape of the baseball, the longhorn has to be as wide as possible without touching the baseball exterior outline.

@RJMV We just need you to scale down the longhorn a bit so that it is inside the circular shape of the baseball. Please keep everything inside the circular shape of the baseball, the longhorn has to be as wide as possible without touching the baseball exterior outline.

 

Here is my entry


Anything let me know
Feedback Appreciated

 

Hello,
Here's my try.

​

 

try

 

@RJMV is the winner. Files received and payment has been sent.